Tagged: greenhouse review

1700C – 8×10 Lean-To Greenhouse Review

Greenhouse Review – Redmond, WA.

1700 Lean-to greenhouse
1700C – 8×10 Lean-to Sunglo Greenhouse – Attached to customer’s house on deck foundation

Hi Sunglo,

greenhouse review
1700C Lean-to Sunglo greenhouse

Thank you for making such a great greenhouse.  We chose the 1700-C lean-to, and it turned out to be a perfect fit on our deck.

We installed it around a kitchen door and can walk straight into the greenhouse without going outside.

greenhouse view
1700C Lean-to Sunglo greenhouse

It’s tall enough for us to walk around comfortably (I’m 6’1”), and wide and deep enough for several large shelves of flowers and room to work.

We’ve even brought in a couple chairs and table so we can hang out with the bonsais and orchids.

greenhouse review
1700C Lean-to Sunglo greenhouse – Interior

It was pretty spectacular to sit out there in a thunder storm with heavy wind, rain and lightning.  The greenhouse was water-tight and didn’t budge.

Greenhouse review
110V power panel with heating/cooling thermostat and outlet

The heater, fan and automatic shutter are hooked up now, and as you described the greenhouse is like a living thing, heating and cooling when it chooses.

We had read in reviews that some greenhouse kits had issues with rattling and weak frames.  We chose Sunglo because we had read your greenhouses were much stronger and in a class by themselves.

greenhouse review
Sunglo greenhouses acrylic panels and aluminum framework

After watching our greenhouse come together, I now know why.  Those rivets and aluminum frame are clearly inspired by aircraft design, and the final result is as tight and solid as an air-frame.

There is no rattling, and nothing moves even when you push hard against the frame.

We are very happy with our greenhouse and would recommend it to anyone.

1700 Lean-to greenhouse
1700C Lean-to Sunglo greenhouse

Thanks so much for making it and for your help getting it up and running.

 

Ron & Bertie

Redmond, WA.

To view this complete project click here.

To learn more about Sunglo’s 1700 lean-to series click here.

Read another customer review here.

Questions? Call us @ 800-647-0606

Lean-to greenhouse review

Lean-To Greenhouse Review – Minnesota

A dear customer of ours in MN. sent us a wonderful story about his greenhouse experience. If you are interested in building a lean-to greenhouse this is a must read!

“The knee wall is 4X6 pressure treated lumber.  It is a higher level of treatment from a local high quality lumber yard, not your standard self service do it yourself store.
Sunglo 1700 Lean-to greenhouse review
1700D – 8×12.5 Lean-to greenhouse – Foundation completed
I started the foundation wall right after I placed the order with Sunglo and took my time getting a good base packed below the timbers.  I dug out the black dirt down 12 inches and put in 8 inches of gravel, packing it as I went and kept it level.  When I put the timbers on top of the gravel it took lots of adjusting to get it level and square.  I measured kitty corner both directions many times. Then let it sit a few days and did some more adjusting after it rained and settled the ground some more.  I used a 2 foot level first and after I thought I had it right I borrowed a transom to make sure, and it was nice and level.  If I had to do it over again, I would get a transom before I started.  It would have saved me some time.
Sunglo 1700 Lean-to greenhouse review
1700D – 8×12.5 Lean-to greenhouse – First steps in the assembly process
Mounting the vertices upright and ridge header on the steel pole building wall was a challenge.
I waited for the greenhouse to arrive to prep the building to make sure I cut the steel in the correct place.   I knew I had to cut the corrugated steel to mount the greenhouse to the building wood frame.
I used a hand held high speed grinder with a cutting disk to slot out the steel siding about 3 inches wide. I inverted J trim on each side of the uprights and under the ridge header to finish the look. I put flashing on the top side of the ridge header. I also installed additional 2X4 framing above and below the ridge header to reattach the steel siding on each side of the slot.
Sunglo 1700 Lean-to greenhouse review
1700D – 8×12.5 Lean-to greenhouse – Assembly process progressing
My largest mistake was to assume my building was plumb. It was only 6 years old and I was very pleased with the quality so I assumed it was plumb. I found out differently when I tried to install the first overhead truss.  It didn’t reach!  When I checked the building I found it was leaning away by 3/4 inch from the top to bottom of the greenhouse. This delayed me a day removing the vertices uprights and ridge header to shim it plumb and reinstalling things.
It took me awhile to assemble the greenhouse because I’m not good at puzzles, so I went slow. I had planned to do so up front.
Sunglo 1700 Lean-to greenhouse review
1700D – 8×12.5 Lean-to greenhouse – Assembly complete!
I only worked half days because it was August on the south side of a steel building and it was hot!  I made a few mistakes but it was easy to drill out the rivets and correct them.
I was mostly done after a week and I was able to do it all by myself, except for mounting the ridge header and the first gable end panel.  My wife held things in place until I secured it.
During the assembly process I appreciated Sunglo’s customer service in discussing and solving the challenges I encountered. I am now enjoying learning how to grow plants in a greenhouse. I have lettuce, spinach, radish, chives, tomatoes, onions and strawberries already growing.”
Sunglo 1700 Lean-to greenhouse review - Interior
Growing strawberries, flowers, tomatoes etc.
Sunglo 1700 Lean-to greenhouse review - Interior
Yellow buckets filled with water help heat the greenhouse
Sunglo 1700 Lean-to greenhouse review - Interior
With multiple layers of shelving and lots of hanging posts you can really use maximum space for growing

 

 

 

 

 

 

 

Lean-to greenhouses are wonderful for limited or confined space. Sunglo offers 2 sizes of lean-to style greenhouses. The 1700 series – 8ft width is shown above and we also carry a 1500 series – 5ft width for even smaller spaces. With lengths from 5′ to 100′ we can help you find the right size for your space. To read another lean-to greenhouse review – click here.

Sunglo Greenhouse Review – Delivery to done!

Our greenhouse kits are manufactured and fabricated in Kent, WA. When you place an order our warehouse team carefully packs and boxes up your greenhouse kit for shipping.

Sunglo Greenhouse
Actual Sunglo Greenhouse Delivery

Our standard shipping service is called Curbside Delivery. Your order will be delivered to a local terminal. The terminal will call you when your order arrives to schedule a delivery appointment. Deliveries are scheduled between 8am and 5pm Monday through Friday. Your kit will be delivered on a lift-gate truck and the driver will unload it for you. We ask that you inspect the boxes for damage before signing the delivery receipt. Once the delivery receipt is signed you can start assembly!

A lot of customers wonder what our kits look like when they arrive. Sunglo received these amazing example pictures and sunglo greenhouse review:

Dear Sunglo,

It’s up now and we couldn’t be happier, when the wind broke several panels, we called and it was replaced within a

Graham1

few days. When we lost some pieces, there was no issue – we called and within 2 days they were delivered with no

questions asked.  When we had questions there was always someone to talk to and walk us through it.  Had such great service from Joanie who answered the phone to the technicians who had so much Graham2patience with us.

Now it’s up, looking good and so proud – just have to go shopping for plants and supplies. Your company is the best and we would recommend it to anyone; and maybe that they get a few extra hands at the start of Graham3the project! Have attached some photos, from delivery to completion – like I said no plants yet, but that won’t be long

 

 

 

Sincerely:

Bob and Bonnie Graham

A pair of very happy customers

Graham4

 

To see more pictures of customers greenhouse projects visit our Facebook page.

If you have any questions about Sunglo’s shipping and/or delivery service please contact us.